JETZT GRATIS PROCRAFT 4,0 Ah Akku sichern!
  • Lieferung in 1 - 2 Tagen
  • 100 Tage kostenfreie Rückgabe
  • Versand aus Deutschland
  • Wir liefern Werkzeug seit 2015
  • +1 Mio. Bestellungen

Description

Scope of Delivery:
- 1x PFERD flap disc Ø40xH15mm grit size 120

Product Description:
Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm

Technical Data:
- Shank Ø: 6mm
- Drive type: Straight grinder, flexible shaft drive
- Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece.
- Machinable materials: Malleable cast iron, steels up to 1,200 N/mm² ( 54 HRC, grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium
- Machining tasks: Levelling, weld seam processing, surface processing, deburring, structuring (matting, line matting and satin finishing), fine grinding in stages
- Width: 15mm
- Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort.
- Length, shaft: 40mm
- RPM, opt.: 9600RPM
- Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths.
- Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design.
- Grit size: 120
- Max. speed: 19100 min-¹
- Abrasive: Aluminium oxide A
- Material suitability Aluminium: limited suitability
- Material suitability cast iron: very suitable
- Material suitability steel: very suitable
- Material: Aluminium oxide
- Ø: 40 mm
- Height: 15 mm
- Material suitability plastic: limited suitability
- Brand: PFERD For commercial use, please observe the building regulations!

For commercial use, please observe the building regulations!

Read more

Product form

PFERD flap disc ( 4000841619 ) Ø40xH15mm grit 120 shank Ø 6 mm

SKU: 138816 EAN: 4007220154465
    €11,42
    incl. VAT, plus shipping
    Buying direct is cheaper for you – find out why

    Price comparison portals and search engines charge high fees on every purchase – often over 20% of the selling price. These costs are always passed on to customers. We do things differently: instead of spending advertising budgets on large platforms, we invest in fair prices, BROpoints, gifts and exclusive best-price deals you'll only find directly with us. No middlemen. No markups. Direct for you.

      100 Tage kostenfreie Retoure 100 days of free returns
      • American Express
      • Apple Pay
      • Google Pay
      • iDEAL Wero
      • Klarna
      • Mastercard
      • +12 more

      Top Picks

      %3Cp%3E%3Ca%20href=%22%23smile-home%22%20title=%22%23smile-home%22%3E%3Cstrong%3EDu%20erh%C3%A4ltst%3C/strong%3E%3C/a%3E%20%3Cstrong%3E[points_amount]%3C/strong%3E%3C/p%3E
      • More from
      • Condition  New

      Ergänzende Artikel

      Auch interessant
      Versand (Dinotech e.K.) & GPSR

      Versand & Rechnung durch: Dinotech e.K.

      Responsible person for the EU (GPSR) Economic operator established in the EU who ensures that the product complies with the required regulations.
      • info@pferd.com
      • +49226490
      • Germany
      • 51709 Marienheide
      • Hauptstr. 13
      • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge

      Description

      Scope of Delivery:
      - 1x PFERD flap disc Ø40xH15mm grit size 120

      Product Description:
      Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm

      Technical Data:
      - Shank Ø: 6mm
      - Drive type: Straight grinder, flexible shaft drive
      - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece.
      - Machinable materials: Malleable cast iron, steels up to 1,200 N/mm² ( 54 HRC, grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium
      - Machining tasks: Levelling, weld seam processing, surface processing, deburring, structuring (matting, line matting and satin finishing), fine grinding in stages
      - Width: 15mm
      - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort.
      - Length, shaft: 40mm
      - RPM, opt.: 9600RPM
      - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths.
      - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design.
      - Grit size: 120
      - Max. speed: 19100 min-¹
      - Abrasive: Aluminium oxide A
      - Material suitability Aluminium: limited suitability
      - Material suitability cast iron: very suitable
      - Material suitability steel: very suitable
      - Material: Aluminium oxide
      - Ø: 40 mm
      - Height: 15 mm
      - Material suitability plastic: limited suitability
      - Brand: PFERD For commercial use, please observe the building regulations!

      For commercial use, please observe the building regulations!

      Passendes zum Artikel

      iBasierend auf deinen Interessen

      Mehr für dich

      iBasierend auf deinen Interessen

      Ähnliche Produkte anderer Hersteller

      iBasierend auf deinen Interessen

      Passende Alternativen

      iBasierend auf deinen Interessen

      Warum Kunden uns vertrauen

      Tausende Handwerker und Heimwerker kaufen regelmäßig bei uns ein. Ihre Erfahrungen und Bewertungen helfen dir, die richtige Entscheidung zu treffen.
      • Über 1 Mio. Bestellungen seit 2021 📦
      • Versand aus Deutschland 🇩🇪
      • 100 Tage kostenfreie Retoure 🔙

      Zuletzt angesehen

      Mehr von MAKITA

      Mehr von MAKITA
      Mehr von FESTOOL

      Mehr von FESTOOL

      Werkzeug kauft man bei den BROs

      Sei kein Kunde, sei ein BRO! ❤️ Wenn Du auf der Suche nach Werkzeugen von Premium-Herstellern wie Makita, Bosch, Festool, Milwaukee, Metabo & Co bist, führt Dich kein Weg an der TOOLBROTHERS-Family vorbei. Wir bieten unseren BROs beste Preise, GRATIS Geschenke, Next-Day Lieferung, BROdeals, persönlichen Service und mehr. Sammel bei jeder Bestellung BROpoints und tausche diese gegen Rabatte ein. Schau auf Social Media vorbei, und lerne die BROs hinter Deiner Bestellung kennen und eins ist versprochen: So eine Company findest Du kein zweites Mal

      Preisvergleichs-Portale und Suchmaschinen verlangen bei jedem Kauf hohe Gebühren – oft über 20 % des Verkaufspreises. Diese Kosten zahlen am Ende immer die Kunden. Wir gehen einen anderen Weg: Statt Werbebudgets an große Plattformen zu zahlen, investieren wir lieber in faire Preise, BROpoints, Geschenke und exklusive Bestpreis-Deals, die Du nur direkt bei uns findest. Ohne Zwischenhändler. Ohne Aufschläge. Direkt für dich.

      Log in

      Forgot your password?

      Don't have an account yet?
      Create account